Chino TP-L0260EN, Инструкция по эксплуатации, Страница: 12 / 23

5
[ ] mark
Connection
● Connect the custom power/alarm output cable and the custom Network cable to this product.
Connect them to align the marks of [ ] back of this product and [Arrow] on the cable connectors.
To avoid misconnections, the custom Network cable is designed not to connect to the
power/alarm output connector of this product. Similarly, the custom power/alarm output cable
cannot be connected to the LAN connector of this product.
The connections are a quick-disconnect locking type. Insert the plug until it clicks.
To unplug, hold the sliding part (that has the [Arrow] marking on) and pull it outward.
If the “A” part is pulled, and the plug may be damaged.
.
● Plug the connector of the custom Network cable to the Ethernet port of a master unit (PC, etc.)
and connect the O-tip terminals of the custom power/alarm output cable to the terminal block of
12VDC Power Supply.
Custom Network
cable LAN connector
Custom power/alarm output
cable ring terminals
Insulate the O-tip alarm output
terminals if not used
.
[Arrow] mark
LAN port
Terminal block
Plug
A