Chilli Penguin Chilli Billie, Инструкция по установке и эксплуатации

Страница: 4 / 46

Page 02 of 43
Important - read before first fire
The painted finish must be cured and set properly.
We use a high temperature stove paint on all of our stoves. It is extremely important
that the paint is cured properly the first time that you light the stove. This is done to
ensure the paint finish will be able to withstand the high temperatures needed. Curing
is done by following the three step process on the facing page. If this process is not
done properly you may experience issues with the paint peeling. We want your Penguin
to be perfect!
To Set / Cure the paint
Once this initial process has been completed, the paint will be properly cured and you
can operate your stove normally according to the instructions provided in this manual.
If any peeling of the paint occurs on your stove this will only be as a result of improper
curing or misuse of the stove such as over fuelling or running the stove too hot.
Therefore any peeling is not covered by your warranty.
Note: During the final higher temperature burn phase there may be some visible smoke
near the stove surface. There may also be an unpleasant odour. To mitigate this effect,
ventilate the room with open windows and doors to provide airflow.
Health warning: The smoke from the curing process displaces oxygen. Small children,
the elderly and people with existing breathing problems should vacate the area during
the hot burn to avoid discomfort. The smoke is primarily Carbon Dioxide, is non-toxic
but can feel uncomfortable.
you’ve bought an amazing stove,
let it be amazing