2
3
A. Dowel Pin 10mm x 40mm
B. Joint Connector Nut 1/4-20
C. Allen Head Bolt 80mm 1/4-20
D. Allen Head Bolt 14mm 1/4-20
E. Allen Head Bolt 55mm
F. Allen Wrench
G. Connector Nut
H. End Panel Footboard
I. Foot Post Left
J. Foot Post Right
K. Top Cap
L. Stretcher
M. Front Stationary Side
N. Back Stationary Side
O. End Panel Headboard
P. Head Post Left
Q. Head Post Right
R. Spring
Figure 1
STEP 1
Hardware Package
K
L
M
I
N
J
O
H
P
Q
R
AB20047_G4
Crib Parts
PARTS LIST
Part Description
Part Number Quantity
11200323
11200077
11200389
11200388
11200089
11200070
11200068
22301038
22301048
22301049
22301052
22301046
22301040
22301041
22301047
22301050
22301051
11200333
4
18
8
8
14
2
4
1
1
1
2
1
1
1
1
1
1
1
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct Crib on an even flat floor.
Note: during the assembly process whenever
using screws or bolts, Check each with the parts list
by letter and size identification. Place each screw
or bolt on the diagram of the item which is sketched
actual size. Be sure to use the proper size specified
in the assembly directions. If any parts are missing
or broken or you need assistance with assembly
The Allen Head Bolts D have a friction enhancing
patch on the thread which may cause resistance
during tightening.
DO NOT return your product to the dealer.
Please identify the crib by the model number
identification stamped on the inside face of the
Stationary side assembly when you call or write to
Foundations®. Make note of all identification
numbers and include this information with your
request.
DO NOT Substitute Parts!
K
AB20047_G5
I
J
B
E
C
C
H
A
A
STEP 2
Construct End Panel Footboard assembly:
Align Foot Post Left I onto dowel on End Panel
Footboard H Top Rail and push together making
sure slotted hole is on the inside opposite the
Childcraft logo. Place Joint Connectors Nut B into
holes in the bottom of top and bottom rail of End
Panel Footboard H . Insert Allen Head Bolts C into
Foot Post and rotate Joint Connector Nuts to align
threads with bolts. Snug Bolts and Connectors with
Allen wrench .
Repeat procedure with Foot Post right J . Note Foot
Post Right J has no slotted holes.The (3) through
holes in the face have a counterbored (larger) entry
hole which will be located on the same face as the
childcraft logo
Insert Dowel Pins A into outer holes on top of End
Panel Footboard H . Place Top Cap K on top of
End Panel Footboard H and align with the Dowel
Pin. Insert Allen Head Bolts E into underside of top
of End Panel Footboard H then thread into metal
inserts in top cap K .
Tighten all bolts securely.
See figure 1.
Figure 2
K
AB20047_G6
P
Q
B
E
C
C
O
A
A
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
AB20047_G3
A
B
C
D
E
F
G
Construct End Panel Headboard assembly:
Align Head Post Left P onto dowel on End Panel
Headboard O Top rail and push together making
sure slotted hole is on the inside.
Place Joint Connector Nuts B into holes in the
bottom of top and bottom rail of End Panel
Headboard O Insert Allen Head Bolts C into Head
Post and Rotate Joint Connectors Nuts to align
threads with bolts and snug with Allen wrench .
Repeat procedure with Head Post right Q . Note
Head Post Right Q has no slotted holes. The (3)
through holes in the face have a counterbored
(larger) entry hole which will be located on the
outside face (opposite face from slotted hole in
Head Post left P ).
Insert Dowel Pins A into outer holes on top of End
Panel headboard O .Place Top Cap K on top of
End Panel Headboard O and align with the Wooden
dowel Pin. Insert Allen Head Bolt E into underside
of top of End Panel Headboard H . Then thread into
metal inserts in top cap K .
Tighten all bolts securely.
See figure 2.
