TIL1X2UU / TIL1X3UU / TIL1X4UU / TILVABUU
Installation Instructions
14
Checking Placement and Alignment
1.
The holes around mounting slots on the mounts can be
used for the included #10 x 1/2" self-tapping screws (C) to
help attach a string to help in aligning and plumbing the
mounts.
NOTE:
There are multiple points on each mount where the
screws can be installed for the plumb line. (See
Figure 17)
2.
Loosely install the self-tapping screws then wrap the string
around the screw and tighten. (See Figure 17)
3.
Run the string tightly between the same hole at each end of
the row of mounts. (See Figure 17)
Figure 17
1
Circles indicate tapping
screw hole locations (on
Strin
g to
assis
t with
align
men
t
2
3
Leveling feet
(top and bottom,
of each mount)
left and right
each mount) for attaching
string to assist with
alignment of mounts
