TIL1X2UU / TIL1X3UU / TIL1X4UU / TILVABUU
Installation Instructions
12
Adding Additional Mounts
Connecting Mounts Side to Side
1.
Loosely install two 1/4-20 x 1/2" button head cap screws (B)
into the second mount (being added to the first mount). (See
Figure 13)
2.
Hang the mount by the installed screws (installed in Step 1)
onto the side connectors on the first mount. (See Figure 13)
Figure 13
3.
Once the second mount is hung on the brackets, tighten up
the screw on each bracket.
4.
Check the plumb of the second mount against the
previously installed mount and adjust so that both mounts
are on the same plane. (See Figure 14)
Figure 14
Just a tip -
To assist in mount installation,
install the side connectors BEFORE the mounts
are attached to the wall. See previous
Adding
Side Connectors
section.
1
Installed
(first) mount
Second mount
(B) x 2
(B)
Side
connector
2
Level
