CHIEF LASER LOCK, Руководство пользователя

Страница: 32 / 44

32
Measurements can be displayed in three different modes: Arrow, Actual Measurements and
Specifications.
Arrow mode shows direction and amount of misalignment for each reference point measured. (See Figure 38.) Arrows indicate di-
rection of misalignment and numerical references indicate amount of misalignment . . . difference between actual measurement and
vehicle specification. Whenever amount of misalignment exceeds allowable tolerance, arrow and numerical reference are shown in
‘red’. When it is within allowable tolerance, they appear in ‘blue’.
Actual Measurements mode shows only current measurements taken by Laser Lock. (See Figure 38 - previous page.) When specifica-
tions don’t exist in the Laser Lock data base, this mode can be used to repair structure through comparison measurements.
Specifications mode shows only a vehicle’s published specifications as obtained from the Laser Lock Data Base. It is for reference
purposes only.
Target Graphics and/or Target Numbers appear on Vehicle Graphic in certain situations. For example: When entering Base Reference
Targets, or when selecting Make Point, Move Target, Freeze or Thaw options. The appearance of such Targets on the Vehicle Graphic
allows operator to work with Targets as per the application.
Figure 38
Height
Length
R
L
R
L
R
L