CHIEF LASER LOCK, Руководство пользователя

Страница: 24 / 44

24
III. LASER LOCK PROGRAM
STARTING UP LASER LOCK SYSTEM
Turn system power switch ‘ on ’. (Figure 29 shows switch at rear of workstation. Inset photo shows rear of 220-volt, 5 amp workstation.)
If the computer doesn’t start after turning on the cabinet switch, the push the power button on your computer.
Computer will examine its circuits and prepare to run the Laser Lock system. This process is called ‘booting up the computer’. It takes
several seconds to complete.
When the Laser Lock ‘Title Screen’ (opening window) is displayed (see Figure 30), the ‘booting up’ procedure is complete.
110 Volt
System
220 Volt
System
Figure 29
Figure 30