CHIEF LASER LOCK Скачать руководство пользователя страница 10

Страница: 10 / 44

COMPONENT OVERVIEWS

Workstation

The Laser Lock Workstation (see Figure 2) is a steel cabinet that houses a Computer, Display Monitor, Keyboard, Printer, Power Supply

(+ 12 volt, 5 AMP), and assorted Targets, Attachments, Clips and Scales. The cabinet is supported by casters and features a drawer for

the Body Scanner when it is not in use.

Laser Lock computer system features a 250 GB hard drive, a DVD drive, 2 GB of memory, includes keyboard and mouse devices, dis-

play monitors, and a printer (see Figure 2).

Connect the Laser Lock to a 110-volt, 15 amp power source or 220-volt, 5 amp power source. (Check voltage requirements for Laser

Lock system being used.) A single purpose line is recommended. Do not use circuits subject to frequent interruptions or outages.

Avoid circuits with power surges such as from welders and some power tools. Built-in surge protector may not be sufficient to protect

against current fluctuations and it may cause the Laser Lock computer to fail. Avoid metal-to-metal contact between components (i.e.

Workstation, Body Scanner, Welder, Vehicle Platform), and move the Laser Lock components away from welding areas to avoid dam-

age from sparks.

Voltage requirements may vary in some countries.

IMPORTANT

Figure

Содержание LASER LOCK













































Результаты поиска

Содержание LASER LOCK

Отзывы:

Бренды по названию

Популярные бренды

CHIEF LASER LOCK, Руководство пользователя

Результаты поиска

Содержание LASER LOCK

Отзывы:

Бренды по названию

Популярные бренды