CHIEF KITEC Series, Руководство по установке

Страница: 14 / 44

KITEC/KITMC SERIES Installation Instructions
14
Cable Management
NOTE:
If installing more than three cables through cable
covers, the transitional cover may not fit well over the
cables at the transition point. Follow Step 1 to help
avoid this problem.
1. (Optional) Use a utility knife to cut a section of lower cable
cover off to create a larger space for the cables to transition
into the upper cable cover. (See Figure 27)
Figure 27
2. Route cables through lower cable cover. (See Figure 28)
3. Route cables through upper cable cover. (See Figure 28)
4. Route cables through ceiling plate cover (A). (See Figure
28)
Figure 28
1
section to remove
(KITEC Series shown)
3
2
(A)
4
(KITEC Series shown)