Chicco Seat3 Fit i-Size, Руководство по установке

Страница: 28 / 192

28
K. Rotation button
L. Side Safety System
x. Diagonal belt guide
Y. Abdominal safety harness guide
Fig. B
M. Isofix connectors
N. Isofix connector button
O. Isofix system connection indicator
P. Rebound bar
Fig. C
Q. Support Leg
R. S upport leg correct extraction indicator
S. Button for closing the support leg
T. Support leg height adjustment button
U. Leg support correct installation indicator
2. PRODUCT FEATURES
This car seat has been approved under reg-
ulation ECE R129/03 for transport of children
from 40 to 125 cm in height.
WARNING
This is an i-Size Enhanced Child Restraint Sys-
tem. It is approved according to UN Regula-
tion No. 129, for use in, i-Size compatible ve-
hicle seating positions as indicated by vehicle
manufacturers in the vehicle users’ manual. If
in doubt, consult either the Enhanced Child
Restraint System manufacturer or the retailer.
This is a i-Size booster seat Enhanced Child
Restraint System. It is approved according to
UN Regulation No. 129. for use primarily in “i-
Size seating positions” as indicated by vehicle
manufacturers in the vehicle user’s manual. If
in doubt, consult either the Enhanced Child
Restraint System manufacturer or the retailer.
3. RESTRICTIONS AND REQUIREMENTS
REGARDING THE USE OF THE PRODUCT
AND VEHICLE SEAT
WARNING!
Follow the restrictions and re-
quirements for use of this product and the
vehicle car seat at all times: safety will not be
guaranteed otherwise.
This child car seat can be installed so that it
faces opposite of the car driving direction.
The car seat can be installed in the rear fac-
ing position when the height of the child is
between 40 cm and 105 cm. The car seat can
be installed facing forward once the child is at
least 76 cm tall.
IMPORTANT!
Do not use forward facing be-
fore the child’s age exceeds 15 months. Chic-
co recommends using the rear facing position
for as long as possible.
WARNING!
Deactivate the passenger airbag
when the child is in the front seat in the rear
facing direction.
WARNING!
40-105 cm: If it is used in a vehicle
equipped with rear safety harnesses with in-
tegrated airbags (inflatable seat belts), the in-
terplay between the inflatable portion of the
seat belt and this child restraint system could
cause serious injury or death. During installa-
tion with the Isofix system, the safety harness
may not be fastened behind the child car seat,
as this would engage the inflatable portion of
the safety harness.
WARNING!
100-125cm: When using in vehi-
cles equipped with rear seat belts with inte-
grated airbags (inflatable seat belts), follow
the car manufacturer's instruction manual.
The car seat can be used on all i-Size approved
vehicle seats (check the vehicle's instruction
manual) and on seats of vehicles included in
the “Vehicle compatibility list” given with the
car seat.
In any event the vehicle seat must be forward
facing. Never use this car seat on vehicle seats
facing the sides or opposite to the direction of
the driver's seat (Fig. 1)
4. INSTALLING THE CAR SEAT AND SEAT-
ING THE CHILD (40-105 cm) (≤ 18 kg).
The car seat is in the forward facing position
when packed.
Extract the support leg (Q) from its setting
(Fig. 2a) and pull it out (Fig. 2b) until the indi-
cator (R) becomes green (Fig. 3).
Extract both the Isofix connectors (M) press-
ing on the buttons (N) (Fig. 4).
Fasten both Isofix connectors (M) to the cor-
responding Isofix hooks found on the vehicle
seat, between the backrest and the seat (Fig.
5). To fasten the connectors, push on the Isofix