8.
Then, slide the Cutter Blades (part #64) against the straight edge or piece of
wood.
9.
Finally, use an Allen Wrench to retighten the three Bolts (part #62) that secure
the Blades, and the Wedge (part #61) to the Cutter (part #42).
REAR SUPPORT (30)
FRONT SUPPORT (31)
BOLT (62)
CUTTER BLADE (64)
FIGURE F
To Level The Cutter Blades:
1.
Depending on product usage, the two Cutter Blades (part #64) may require
leveling. These adjustments are critical and are best performed by a qualified
technician.
To Install A New Drive Belt:
1.
The Drive Belt (part #26) should be periodically inspected. If the Belt shows
signs of cracks, tears, will not track properly, or comes off the Driving Pulley (part
#18) and/or the Driven Pulley (part #25) it should be replaced.
(See Figure G.)
2,
To replace the Drive Belt (part #26), remove the Self-Tapping Screw (part #21).
Then, remove the Housing (part #28).
(See Assy. Diagram.)
3.
Remove the old Drive Belt (part #26), and thoroughly clean the Driving Pulley
(part #18) and Driven Pulley (part #25).
4.
Place the new Drive Belt (part #26) onto the Driving Pulley (part #18). Then,
rotate the Pulley clockwise while pushing the Belt onto the Driven Pulley (part
#25)
SKU 45376
PAGE 10
WOOD/STRAIGHT EDGE
Brought to You by Augusta Flint
Содержание 45376
Страница 13: ...Brought to You by Augusta Flint ...
