CHICAGO 45376, Инструкция по сборке и эксплуатации

Страница: 6 / 13

KNOB (41)
SCALE (36)
REAR
HANDLE (55)
LOCK BUTTON / START SWITCH (57)
HOUSING (28)
RABBETING WIDTH
GUIDE (66)
WING KNOB (51)
RABBETING
BRACKET (65)
SCREW (13)
WASHER (11)
NUT (27)
FIGURE B
OPERATING INSTRUCTIONS
NOTE: For further reference to the parts listed below, refer to the Assembly Dia-
gram on page 13 of this manual.
To Safely Turn The Planer “ON” And “OFF”:
1. Make sure to hold the Planer with both hands while starting it, as torque from the
Motor will cause the tool to twist.
2. To turn the Planer “ON”, depress the Lock Button (part #57) and squeeze the
Start Switch (part #57).
(See Figure B and Assy. Diagram.)
3. To turn the Planer “OFF”, release pressure on the Start Switch (part #57) and the
Planer will automatically shut down.
To Adjust The Cutting Depth:
1. NOTE: ALWAYS disconnect the Planer from its electrical supply source prior to
performing any servicing, maintenance, cleaning, or adjustments to the tool.
2. To adjust the cutting depth, rotate the Knob (part #41) clockwise or counterclock-
wise until the indicator aligns at the desired setting on the Scale (part #36).
(See
Figure B and Assy. Diagram.)
SKU 45376 PAGE 6 REV 12/06
WARNING: CHECK BLADE SETTING AND TIGHTNESS BEFORE INITIAL USE.
Brought to You by Augusta Flint