Chicago Pneumatic CPS 750, Инструкция по эксплуатации, Страница: 80 / 94

CPS 750
80 1310 3012 02
CPS
7 Available options
Support
A rigid support mounted version for rough construction conditions with the possibility to be mounted on a
truck. The installation allows the unit to be put on and taken off the truck daily. It is possible to handle the
unit with a forklift.
Fix height towbar with brakes
A fix towbar with integrated parking brake.
DIN/NATO/ITA eye
Towing eye according to DIN, NATO or ITA specification.
SCANDIC cold weather package (to -10°C)
The SCANDIC cold weather package consist of a heater plug, installed in the air-inlet to the engine, a
dual approved vessel (EC/ASME) for which the material is approved and certified up to –29°C, and a
blow-off valve on the vessel to minimise the resistance from the oil in the vessel when starting at extreme
cold-temperatures. Also synthetic compressor oil is used to improve viscosity at low temperatures.
NORDIC cold weather package (-10°C to –25°C) - OTM only
The NORDIC cold weather package consist of a preheater installation in combination with the SCANDIC
cold weather package (-10°C).This option includes a coolant heater; an engine-independent water
heater.
The installation works on battery voltage and comes together with a timer function. A 5000 Watt heater
will heat up the engine coolant by means of consuming the onboard fuel. (fuel consumption: 0.62 l/h in
operation, water pump capacity: +/- 900 l/h). The undercarriage is adapted due to the increased weight
ARCTIC cold start package (-25°C to –30°C) - OTM only
The ARCTIC cold weather package is a combination of the NORDIC cold weather package (-25°C) and
an electric engine preheater to keep the engine coolant on constant temperature and circulating by build-
in pump (power supply 230VAC 1500W). Also additional insulation, heating pads and an aftercooler
bypass are installed.
After Water separator
The aftercooler reduces the discharging air temperature to a 10°C.
On units with a cold weather option a bypass on the aftercooler is standard.
Fine Filter (PD)
The fine-filter package completes the after cooler option. It removes particles and oil content down to 0.01
mg/m
3
. Service and replacement of the filter can be done without dismounting other parts or canopy.
Active Coalescing Filter (QD)
For improved quality air an additional oil vapour and odour filter is available reducing the oil content to a
maximum of 0.003 mg/m
3
. The active coal filter pack option can be serviced without dismounting other
parts or canopy.