Page 3
For technical questions, please call 1-888-866-5797.
Item 98958
SAFET
y
W
EL
d
IN
g
C
UTTIN
g
M
AINTENANCE
SETU
p
7.
do not weld or cut any material that has a
combustible coating or a combustible internal
structure, such as drums or tanks, without an
approved method for eliminating the hazard.
8.
do not dispose of hot slag in containers
holding combustible materials.
9.
Keep a fully charged fire extinguisher close
by and know the proper way to use it.
10.
After welding or cutting make a thorough
check for evidence of fire and be aware the
easily visible flame or smoke may not be
present for some time after a fire has started.
11.
do not weld or cut in atmospheres
containing dangerously reactive or
flammable gases, vapors, liquids, or dust.
12.
Clean and purge containers before applying
heat.
Do not apply heat to a container that has
held an unknown substance or a combustible
material whose contents, when heated, can
produce flammable or explosive vapors.
Vent closed containers, including castings,
before preheating, cutting, or welding.
personal Safety
1.
Wearing and using personal safety clothing and
safety devices reduce the risk of injury.
Wear the following:
a.
Fire-resistant clothing
(Do not wear pants with
cuffs, shirts with open pockets, or any clothing
that can catch and hold molten metal or sparks.)
b.
Fire-resistant leather leggings and work boots
c.
dry, insulating leather welding gloves
d.
NIOSH-approved respirator
e.
Shade 5 or higher welding goggles
f.
Appropriate head covering to
protect head and neck
g.
Fire-resistant ear plugs or ear muffs
(if welding or cutting overhead
or in confined spaces)
Keep clothing and safety equipment free of grease,
oil, solvents and any other flammable substances.
2.
Stay alert. Watch what you are doing, and
use common sense when operating this Torch.
do not use while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while operating
may result in serious personal injury.
3.
do not overreach. Keep proper footing and
balance at all times.
Proper footing and balance
enables better control in unexpected situations.
4.
INHALATION HAZARd:
Welding and Cutting produce
TOXIC FUMES.
Exposure to welding or cutting exhaust
fumes can increase the risk of developing certain
cancers, such as cancer of the larynx and lung
cancer. Also, some diseases that may be linked to
exposure to welding or cutting exhaust fumes are:
• Early onset of Parkinson’s Disease
• Heart disease • Ulcers
• Damage to the reproductive organs
• Inflammation of the small intestine or stomach
• Kidney damage
• Respiratory diseases such as
emphysema, bronchitis, or pneumonia
Use natural or forced air ventilation and
wear a respirator approved by NIOSH
to protect against the fumes produced
to reduce the risk of developing the
above illnesses.
5.
Avoid overexposure to fumes and gases.
Keep your head out of the fumes. Do not breathe
fumes. Use enough ventilation or exhaust,
or both to keep fumes and gases away from your
breathing area. Where ventilation is questionable,
have a qualified technician take an air sampling
to determine the need for corrective measures.
If necessary, use mechanical ventilation to
improve air quality. If this is not possible, use an
approved respirator. Do not work in confined
areas unless they are well-ventilated or you are
wearing an air supplied ventilator. Always follow
OSHA guidelines for Permissible Exposure Limits
(PEL’s) for various fumes and gases.
Follow the American Conference of Governmental
Industrial Hygienists recommendations for the
Threshold Limit Values (TLV’s) for fumes and gases.
Have a recognized specialist in Industrial Hygiene
or Environmental Services check the operation
and air quality and make recommendations
for the specific welding or cutting situation.
6.
WARNINg:
This product, when used for welding,
plasma cutting, soldering, or similar applications,
produces chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5,
et seq.
)
7.
WARNINg:
The brass components of this product
contain lead, a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5,
et seq.
)
