Page 14
For technical questions, please call 1-888-866-5797.
Item 98958
SAFET
y
W
EL
d
IN
g
C
UTTIN
g
M
AINTENANCE
SETU
p
Cutting
Cutting Tip pressure Settings
The Cutting Attachment is used to cut metal up to 3″ thick.
The included tip, size 0, cuts metal up to 1/2″ thick.
Check the thickness of the metal to be cut and use the chart below to choose the appropriate size tip for the job.
If cutting metals over 1/2″ thick, a different tip will be needed.
Table B: Cutting Tip Flow data
Cutting
Thickness
(inches)
Standard
Nozzle
Size
Cutting Oxygen
Pressure
(PSI)
Acetylene
Pressure
(PSI)
Speed
(IPM)
1/2
0
30~35
3~5
20~24
3/4
1
30~35
3~5
17~21
1-1/2
2
40~45
3~7
13~17
2-1/2
3
45~50
4~10
10~13
3
4
45~50
5~10
9~12
The Cutting Attachment is attached to the Torch Handle and a Cutting Tip
is attached to the end of the Cutting Attachment.
pre-heat Oxygen Valve:
Adjusts pre-heat flame oxygen level.
Oxygen Cutting Lever:
Activates extra flow of oxygen for cutting.
Cutting
Attachment
Torch
Handle
Cutting
Tip
Oxygen
Cutting
Lever
pre-heat
Oxygen Valve
Acetylene (gAS)
Torch Valve
Oxygen (OXy)
Torch Valve
