SKU 98912
For technical questions, please call 1-800-444-3353.
Page 4
Check for misalignment or binding
g.
of moving parts, breakage of parts,
and any other condition that af-
fects the Shear’s operation.
If dam-
aged, have the tool serviced before
using. Many accidents are caused by
poorly maintained tools.
use only accessories that are
h.
identified by the manufacturer for
the specific tool model.
Use of an
accessory not intended for use with
the specific tool model, increases the
risk of injury to persons.
Service
Tool service must be performed
a.
only by qualified repair personnel.
When servicing a tool, use only
b.
identical replacement parts. use
only authorized parts.
use only the lubricants supplied
c.
with the tool or specified by the
manufacturer.
SavE THESE
inSTRuCTiOnS.
SYmBOLS anD
SpECiFiC SaFETY
inSTRuCTiOnS
Symbol Definitions
Symbol
property or statement
n
o
No-load speed
.../min
Revolutions or reciprocation per
minute
pSi
Pounds per square inch of pressure
ft-lb
Foot-pounds of torque
Bpm
Blows per minute
CFm
Cubic Feet per Minute flow
SCFm
Cubic Feet per Minute flow at
standard conditions
npT
National pipe thread, tapered
npS
National pipe thread, straight
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.
WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved dust mask/respirator.
WARNING marking concerning Risk
of Explosion.
Specific Safety Instructions
DANGER! Keep hands and body
1.
away from cutting area and Blades.
Keep your second hand on Motor
Housing. Contact with the Blades will
result in a serious injury.
