SKU 91979
For technical questions, please call 1-800-444-3353.
Page
2
T
HANK YOU for choosing a
HARBOR FREIGHT TOOLS
product. For future reference, please
complete the owner’s record below:
Model______________
Serial No._____________
Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
The Compact Powder Coat Oven features a compact design for use in baking powder coat materi-
als and preheating parts. The Compact Powder Coat Oven is for use on non-volatile carbons and
solvent based materials.
Technical Specifications
Outside Dimensions:
23-1/4" H x 14-5/8" W x 14-3/4" D
Inside Diameter:
11-3/4" W x 14-3/4" H x 12” D
Heater Block:
Single 500 Watt
Cord, Plug and Thermostat Switch:
UL
®
Listed
Power Source:
120 Volt, 60 Hz
Cord:
18 AWG x 3c
Heat Range:
90-480° F
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
WORK AREA
1.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2.
Do not operate the Oven in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Electrical products create sparks which may ignite the
dust or fumes.
3.
Keep bystanders, children, and visitors away while operating the Oven.
Distractions can cause you to lose control. Protect others in the work area from debris.
Provide barriers or shields as needed.
ELECTRICAL SAFETY
4.
Grounded products must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded.
If the
Oven should electrically malfunction or break down, grounding provides a low resistance