background image

SKU 91979

      For technical questions, please call 1-800-444-3353.

   Page 

4

TOOL USE AND CARE

16.

Do not use the Oven if the thermostat does not turn it on or off properly.  

Any

appliance that cannot be controlled with the Power Switch is dangerous and must  be
replaced.

17.

Disconnect the Power Cord Plug from the power source before making any
adjustments or doing maintenance on the Oven.  

Such preventive safety measures

reduce the risk of starting the tool accidentally.

18.

Maintain the Oven with care.  

Do not use a damaged Oven.  Tag damaged Oven “Do not

use” until repaired.

19.

Never attempt to use the Oven if it is not working properly.  

If any discrepancy is noted,

have the Oven serviced immediately.

SERVICE

20.

Oven service must be performed only by qualified repair personnel.  

Service or

maintenance performed by unqualified personnel could result in a risk of injury.

21.

When servicing the Oven, use only identical replacement parts.  Follow instructions in
the 

“Inspection, Maintenance, And Cleaning” section of this manual. 

 Use of

unauthorized parts or failure to follow maintenance instructions may create a risk of electric
shock or injury.

Содержание 91979














Отзывы: