Page 6
For technical questions, please call 1-800-444-3353.
SKU 67097
Include vibration-free periods each
5.
day of work.
Grip the power tool as lightly as pos-
6.
sible (while still keeping safe control
of it). Let the tool do the work.
To reduce vibration, maintain the
7.
power tool as explained in this manu-
al. If any abnormal vibration occurs,
stop use immediately.
SaVE THESE
InSTRUCTIOnS.
SPECIFICaTIOnS
Charger Input
120 V~ / 60 Hz
Battery Type
12 V Lithium
(SKU 67120)
Sandpaper Pad
Dimensions
3” L X 3-1/4” W
Accessories
Sandpaper (38)
Sanding Pad (40)
Cutting Blade (42)
Scraper (3)
Hex Wrench (41)
UnPaCKIng
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
aSSEMBLY InSTRUCTIOnS
Read the EnTIRE IMPORTanT
SaFETY InFORMaTIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVEnT
SERIOUS InjURY
FROM aCCIDEnTaL
OPERaTIOn: Turn the Power
Switch (13) off and remove the
Battery Pack from the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
attachment
[Scraper (3)]
Spindle
(4)
Figure 1
1. Place attachment, such as Scraper
(3), over Spindle (4) with shoulder
facing forward. Line up the holes on
the attachment with the tabs on the
Spindle shoulder.
(See Figure 1.)
Attachments may be mounted at
2.
angles up to 90° left or right. The at-
tachment should not turn on Spindle
and the holes on the attachment must
line up with the tabs on the Spindle.
note:
Cutting Blade (42) should only be
used in the straight ahead position.
