Chevrolet VENTURE 2001 Скачать руководство пользователя страница 310 | Manualshive

Страница: 310 / 460

Chevrolet VENTURE 2001 Скачать руководство пользователя страница 310

4-32

Towing a Trailer

CAUTION:

If you don’t use the correct equipment and drive
properly, you can lose control when you pull a
trailer. For example, if the trailer is too heavy, the
brakes may not work well

--

or even at all. You

and your passengers could be seriously injured.
Pull a trailer only if you have followed all the
steps in this section. Ask your dealer for advice
and information about towing a trailer with
your vehicle.

NOTICE:

Pulling a trailer improperly can damage your
vehicle and result in costly repairs not covered by
your warranty. To pull a trailer correctly, follow
the advice in this part, and see your dealer for
important information about towing a trailer
with your vehicle.

Your vehicle can tow a trailer. To identify what the
vehicle trailering capacity is for your vehicle, you
should read the information in “Weight of the Trailer”
that appears later in this section. But trailering is
different than just driving your vehicle by itself.
Trailering means changes in handling, durability
and fuel economy. Successful, safe trailering takes
correct equipment, and it has to be used properly.

That’s the reason for this section. In it are many
time

-

tested, important trailering tips and safety rules.

Many of these are important for your safety and that
of your passengers. So please read this section carefully
before you pull a trailer.

«
...
308
309
310
311
312
...
»

Содержание VENTURE 2001













































































































































































































































































































































































































































































Отзывы:

Нет отзывов