Chevrolet VENTURE 2001 Скачать руководство пользователя страница 199 | Manualshive

Страница: 199 / 460

Chevrolet VENTURE 2001 Скачать руководство пользователя страница 199

2-86

If the air inflator system does not turn on, the fuse may
be blown or installed incorrectly. See “Fuses and Circuit
Breakers” in the Index or see your dealer for service.

Your air inflator will automatically shut off after about
10 minutes. To reset, press the ON switch again.

Don’t run your air inflator for longer than 30 minutes at
one time. If you do, you may damage the system. After
30 minutes, wait at least 10 minutes before restarting the
air inflator.

To turn off the inflator, do the following:

1. Press OFF and detach the hose, first from the

inflated object, then from the outlet.

2. Put the protective cap back on.

3. Place the inflator kit tools in the pouch, and store in

the glove box.

To put the cover back on, line up the tabs at the back of
the cover and put it in place. Push down the tab to
secure the cover.

Accessory Power Outlets

Accessory power outlets can be used to plug in electrical
equipment such as a cellular telephone, CB radio, etc.
Follow the proper installation instructions that are
included with any electrical equipment you install.

The front accessory power outlets are located below the
cupholders. Pull the cover down to use the power outlet.
When not in use, keep the cover on.

The rear accessory power outlet is located in the rear
compartment on the driver’s side. To remove the cover,
pull the tab on the cover and pull it off.

«
...
197
198
199
200
201
...
»

Содержание VENTURE 2001













































































































































































































































































































































































































































































Отзывы:

Нет отзывов