manualshive.com logo in svg

Chevrolet VENTURE 2001, Руководство пользователя, Страница: 159 / 460

Поделиться
Скачать
Chevrolet VENTURE 2001 Скачать руководство пользователя страница 159

2-46

3. If your engine still won’t start (or starts but then

stops), it could be flooded with too much gasoline.
Try pushing your accelerator pedal all the way to the
floor and holding it there as you hold the key in
START for a maximum of 15 seconds. This clears
the extra gasoline from the engine. If the engine still
won’t start or starts briefly but then stops again,
repeat Step 1 or 2, depending on temperature. 
When the engine starts, release the key and the
accelerator pedal.

NOTICE:

Your engine is designed to work with the
electronics in your vehicle. If you add electrical
parts or accessories, you could change the way
the engine operates. Before adding electrical
equipment, check with your dealer. If you don’t,
your engine might not perform properly.

Engine Coolant Heater (If Equipped)

In very cold weather, 0

_F (

-

18

_C) or colder, the engine

coolant heater can help. You’ll get easier starting and
better fuel economy during engine warm

-

up. Usually,

the coolant heater should be plugged in a minimum of
four hours prior to starting your vehicle.

Содержание VENTURE 2001













































































































































































































































































































































































































































































Отзывы:

Нет отзывов