Chevrolet VENTURE 2001 Скачать руководство пользователя страница 22

Страница: 22 / 460

1-10

Removing the Split Bench Seat

Make sure the seatback is in the upright position.

1. For the second row split bench, with the seatback in

the upright position, unhook the side attachment for
the safety belt. This mini

buckle is located on the

right side of the seat.

2. Push the red center

of the buckle up
with a small pointed
object

like a key

or a pen

to remove

the seat belt, if needed.

3. Lift the seatback recliner lever or pull the nylon strap

on the back of the seat to fold the seatback forward.

4. Slide the seat all the way back by lifting one of the

adjustment levers and sliding the seat fully rearward.

5. From behind the bench seat, pull the nylon strap at

the center of the base of the seat to release the rear
latches from the floor pins.

Do not let go of the strap until the seat is folded all
the way forward.

Содержание VENTURE 2001












































































































































































































































































































































































































































































Результаты поиска

Содержание VENTURE 2001

Отзывы:

Chevrolet VENTURE 2001, Руководство пользователя, Страница: 22 / 460

Результаты поиска

Содержание VENTURE 2001

Отзывы: