Chevrolet VENTURE 2001 Скачать руководство пользователя страница 272 | Manualshive

Страница: 272 / 460

Chevrolet VENTURE 2001 Скачать руководство пользователя страница 272

3-39

Using Song List Mode

The integrated 6

-

disc CD changer has a feature

called song list. This feature is capable of saving
20 track selections.

To save tracks into SONG LIST perform the
following steps:

1. The disc player must be on with at least one disc

loaded. See “LOAD/EJECT” previously for
more information.

2. The disc changer must not be in song list mode.

S

-

LIST should not appear in the display. If S

-

LIST

is present, press SONG LIST to turn it off.

3. Select the desired disc by pressing the numbered

pushbutton and then use the SEEK SCAN right
arrow button to locate the track that you want to
save. The track will begin to play.

4. Press and hold SONG LIST for two or more seconds

to save the track into memory. When SONG LIST
is pressed a beep will be heard immediately. After
two seconds of pressing SONG LIST continuously,
two beeps will sound, to confirm that the track has
been saved.

5. Repeat Steps 3 and 4 for saving other selections.

To play the song list, press SONG LIST. One beep will
be heard and S

-

LIST will appear on the display.

The recorded tracks will begin to play in the order that
they were saved.

You may seek through the song list by using the
SEEK SCAN arrows. Seeking past the last saved
track will return you to the first saved track.

To delete tracks from SONG LIST perform the
following steps:

1. The disc player must be turned on.

2. Press SONG LIST to turn song list on. S

-

LIST

will appear on the display.

3. Press the SEEK SCAN arrows to select the desired

track to be deleted.

4. Press and hold the SONG LIST button for

two seconds. When pressing SONG LIST one beep
will be heard immediately. After two seconds of
pressing the SONG LIST button continuously,
two beeps will be heard, to confirm that the track
has been deleted.

«
...
270
271
272
273
274
...
»

Содержание VENTURE 2001













































































































































































































































































































































































































































































Отзывы:

Нет отзывов