Chevrolet Equinox Fuel Cell, Руководство пользователя

Страница: 119 / 252

Manual Operation
To change the current fan speed, turn the left knob.
A
(Fan): Turn the left knob clockwise or
counterclockwise to increase or decrease the fan speed.
To turn the fan off, turn the left knob to the
9
position. In any setting other than off, the fan runs
continuously with the start switch on. The fan must be
turned on to run the air conditioning compressor.
There will be some airflow noticeable from the various
outlets when driving, even with the fan in the off position.
This is to ensure some fresh air is always available in
the vehicle. To turn off the air completely, turn the fan to
9
and select the recirculation button.
Temperature Control: Select the desired cabin air
temperature between 60-90°F (16-32°C). Typically, the
best setting is near 75°F (23°C). Choosing the
coldest or warmest temperature setting does not cause
the system to heat or cool any faster.
To change the current air delivery mode, use the right
knob to select one of the following:
H
(Vent): This mode directs air to the instrument
panel outlets.
)
(Bi-Level): This mode splits the air between the
instrument panel outlets and the floor outlets.
6
(Floor): This mode directs most of the air to the
floor outlets with some air directed to the windshield.
When this mode is selected, the system turns the
recirculation mode off. Recirculation mode cannot be
selected while in floor mode. This is to help prevent
window fogging.
The right knob can also be used to select defog or
defrost mode. See “Defogging and Defrosting” later in
this section.
#
(Air Conditioning): Press this button to turn the air
conditioning system on or off. When this button is
pressed, an indicator light comes on to show that the air
conditioning is activated. The air conditioning can be
selected in any mode as long as the fan is on and the
outside temperature is above freezing. A flashing
indicator light indicates that the air conditioning
compressor is currently not available.
On hot days, use the automatic fan and air delivery
mode settings and the vehicle will reach the desired
temperature more quickly. The desired fan and air
delivery mode settings can still be adjusted manually.
Open the windows to let the hot inside air escape, then
close them. This helps reduce the time it takes for
the vehicle to cool down and helps the system to
operate more efficiently.
3-19