Chevrolet Equinox Fuel Cell, Руководство пользователя

Страница: 94 / 252

Torque Lock
If you are parking on a hill and you do not shift your
drive unit into PARK (P) properly, the weight of
the vehicle may put too much force on the parking pawl
in the drive unit. You may find it difficult to pull the
shift lever out of PARK (P). This is called “torque lock.”
To prevent torque lock, set the parking brake and
then shift into PARK (P) properly before you leave the
driver’s seat. To find out how, see
Shifting Into PARK (P)
on page 2-17 .
When you are ready to drive, move the shift lever out of
PARK (P) before you release the parking brake.
If torque lock does occur, contact OnStar
®
or your
Driver Relationship Manager (DRM).
Vehicle Shutdown
1. Set the parking brake. See Parking Brake on
page 2-16 . Move the shift lever to Park (P).
2. Turn the key to “SYSTEM OFF/STEERING
LOCKED” and remove the key.
The fuel cell system may run for several minutes after
switch off, for cooling down and shutting off the fuel cell
system.
Shifting Out of PARK (P)
This vehicle is equipped with an electronic shift lock
release system. The shift lock release is designed to:
•
Prevent key removal unless the shift lever is in
PARK (P) with the shift lever button fully released,
and
•
Prevent movement of the shift lever out of PARK (P),
unless the key is in SYSTEM ON or SYSTEM
OFF/STEERING UNLOCKED and the regular brake
pedal is applied.
To shift out of PARK (P) use the following:
1. Apply the brake pedal.
2. Then press the shift lever button.
3. Move the shift lever to the desired position.
If you still are unable to shift out of PARK (P):
1. Fully release the shift lever button.
2. While holding down the brake pedal, press the shift
lever button again.
3. Move the shift lever to the desired position.
If you still cannot move the shift lever from PARK (P),
contact OnStar
®
or your Driver Relationship
Manager (DRM).
2-18