Using the Air Compressor without
Sealant to Inflate an Underinflated Tire
(Not Punctured)
To use the air compressor to inflate a tire with air only
and not sealant:
1. Unlock the air only hose (F) from the sealant
canister (B) by pulling up on the lever.
2. Pull the air only hose (F) from the sealant
canister (B).
3. Remove the tire valve stem cap from the flat tire by
turning it counterclockwise.
4. Push the air only hose (F) onto the tire valve stem
and push the lever down to secure in place.
5. Remove the air compressor accessory plug (C)
from the unit.
6. Plug the air compressor accessory plug into an
accessory power outlet in the vehicle. See
Accessory Power Outlet(s) on page 3-16
.
Do not slam the door or close the window on the
compressor accessory plug cord.
7. Start the vehicle. See
Starting Your Vehicle on
page 2-13
for more information. The vehicle
must be running while using the air compressor.
{
CAUTION:
Overinflation could cause the tire to rupture,
and you or others could be injured. Be sure to
read the inflator instructions, and inflate the
tire to its recommended pressure. Do not
exceed 36 psi (248 kPa).
8. Push the On/Off switch (D) to the I (on) position.
5-42
Содержание Equinox Fuel Cell
