6
Electronic Precision Shift
The electronic drive unit shift lever always starts in a center position, represented by a
dot on the shift pattern displayed on top of the shift lever. The selected gear position
illuminates in red. After shifting, the shift lever returns to the center position.
Park
– Press the button on top of the lever
(A) to shift into Park. The vehicle will not
shift out of Park unless the ignition is on,
the brake pedal is applied, and the button
on the side of the lever (B) is pressed.
Reverse
– Press the button on the side of
the lever (B) and move the lever forward
and then left to shift into Reverse.
Neutral
– Move and hold the lever forward
for ½ second to shift into Neutral.
Note:
The transmission will not stay in Neutral for an extended period. It will automatically shift
into Park.
Drive
– Move the lever rearward to shift into Drive.
One-Pedal Driving
– With the transmission in Drive, pull the lever rearward to the L (Low)
position to enable “one-pedal” driving. When the accelerator pedal is not applied, regener-
ative braking is active to help slow the vehicle. Use the brake pedal for additional braking
or panic stops. Pull the lever rearward again to return to Drive.
Automated Car Wash Mode
To place the transmission in Neutral with the vehicle running:
1. While pressing the brake pedal, open the driver’s door and then shift to Neutral.
2. The indicator should show N. If it does not, select Neutral again.
3. Upon returning to the vehicle, shift into Park.
Electric Parking Brake
To apply the parking brake, pull up the
Parking Brake switch by the shift
lever.
To release the parking brake, turn on the
vehicle, press the brake pedal, and then
press the
switch.
See Driving and Operating in your Owner Manual.
A
B