13
Charging
Start Charging
The provided 120-volt portable charge cord is located under the storage floor in the cargo
area and can be used to charge the vehicle when a 240V charging station is not available.
1. With the vehicle parked, turn off the vehicle and select the Charging button at the
bottom of the Energy Summary screen.
2. Review the selected Charge Mode and
Charge Limit. Select the Charge Limit toggle
button if an increased charging limit is
desired. Use the 8-amp charge limit until a
qualified electrician inspects your home’s
electrical circuit capacity, or if the electrical
circuit or outlet capacity is not known.
Note:
The charge level selection returns to the 8-amp
setting each time the vehicle is driven.
3. Plug the charge cord into an electrical
outlet. DO NOT PLUG INTO AN EXTENSION
CORD. Charge cord indicators should be
green. Where possible, secure the charge
cord to the wall.
4. Press and release the rear edge of the
charge port door, located just in front of
the driver’s door, to open it. Plug the charge
cord into the charge port.
5. The Charge Status indicator on top of the
instrument panel will illuminate green and
a tone will sound when properly connected.
6. Periodically check the electrical outlet/
plug while charging. Discontinue use if
the electrical outlet/plug is hot and have
the electrical outlet serviced by a qualified
electrician.
If the vehicle is locked with the RKE trans-
mitter, the charge cord theft alert is armed
automatically after 30 seconds.
Note:
When the theft alert is armed, the alarm will sound when the plug is disconnected from the
vehicle. To change charge cord theft alert options, go to Energy in the Vehicle Settings menu.
To temporarily override a delayed charge event, remove and reconnect the charge cord
to the vehicle within 5 seconds. It will begin charging immediately.
See Driving and Operating in your Owner Manual.