CHESTER Coventry Pro, Руководство по эксплуатации

Страница: 4 / 49

Check for alignment of all moving parts, binding of parts, broken parts, mounting and any
other condition that may affect the machines operation. A guard or other part that is
damaged should be properly repaired or replaced.
20. Feed a workpiece into a blade or cutter against the direction of rotation.
21. Never leave a machine running unattended, turn the power off and make sure that the
machine has come to a complete stop before walking away.
2. Safety Rules for Lathes
Safety is a combination of operator common sense and alertness at all times when a lathe is
being used. Study these safety rules and the general safety rules before operating this
machine and retain for future use.
1.
Wear eye protection.
2. Never attempt any operation or adjustment if the procedure is not understood.
3. Keep fingers away from any rotating parts and cutting tools while in operation.
4. Never force a cutting action.
5. Never perform an abnormal or little used operation without study and the use of
adequate blocks, jigs, stops and fixtures etc.
6. Use a shop manual such as the “Machinery’s Handbook or sim ilar to check the
recommended cutting speeds, feeds and operation details.
7. Do not remove the drive cover while the machine is in operation. Make sure that it is
always closed.
8. Always remove the chuck key, even when the machine is not in operation.
9. Do not attempt to adjust or remove the tools when the machine is in operation.
10. Always keep cutters sharp.
11. Never use this machine in an environment with explosive materials or where a spark could
ignite a fire.
12. Always use identical replacement parts when servicing or repairing this machine.
Warning!
Do allow familiarity (gained from frequent use of your lathe) to become commonplace. A
careless fraction of a second can allow for sever injury.