We have a team of dedicated technical and expert advisors that will offer you the
support you need with any planning and technical advice through your project from
start to finish. Freephone 0800 085 3464
AXXYS
®
Stairparts
Fitting Instructions
Then with a pre-assembled spindle
(
instructions found on the following pages
)
secured onto the baserail no more than
99mm away from the newel, lay the handrail
assembly onto the spindle to determine the
height of where the bracket sits on the newel.
Secure using two 30mm screws provided
(fig. 12)
If you are using an intermediate post you will
need to slide on the intermediate connector
on to your handrail now, before attaching the
bottom connector
Next slide the Bottom connector onto & up
the handrail, line up both the intermediate and
the bottom connector into their relevant
newels post brackets and drop into place
ensure the bolt holes are perfectly aligned,
you can now pre drill and secure the handrail
connectors in their positions using the 25mm
screws provided.
Then loosely fix the handrail connectors
into
the appropriate newel connector using the
45mm bolt and spacer provided, making sure
the chamfered end goes into the hole first. Do not fit any cover caps yet (fig. 8).
Fit the intermediate connector onto the top
of the newel and secure with the two 30mm
screws provided.
Now fit the top connector to the handrail.
Slide the connector onto the handrail
and secure using the two 30mm screws
provided.
Loosely assemble the remaining half of the
bracket, using the bolt and two washers
provided (fig. 11).
