AXXYS
®
Stairparts
Fitting Instructions
Intermediate Landing
Handrail Connector
for Intermediate Landing
Newels
NOTE: your intermediate Landing Newel
must be installed at the same height as
your top newel.
If your staircase requires an Intermediate
Newel on the landing for added strength,
then our Intermediate Landing Handrail
Connector has been designed for this
instance, as it will allow an Evolution Newel
Post to be connected to the Handrail.
You can also rotate it any angle between
90
o
to 180
o
to suit a multitude of
configurations.
Now measure the handrail lengths you
require from newel to newel (including
connector) and cut to suit.
Slide both parts of the Intermediate
Landing Handrail Connector onto the newel
and position correctly their orientation,
then secure using the two 30mm screws
provided.
Finally slide the handrails in the connectors secure using the 30mm screws provided
(fig. 19).
Now slide the short handrail end into the
Landing Handrail Connector, and secure
using the two 30mm screws provided.
The completed assembly should look
like the illustration to the left (fig. 18).
