CHERUBINI A510038, Инструкция по эксплуатации

Страница: 20 / 24

39
FULL MEMORY CLEARING
The full memory clearing can be performed in two ways:
1) WITH THE REMOTE CONTROL
Tn: Already programmed remote control
Tn Tn Tn (4 sec)
2) WITH THE WHITE WIRE
Do this operation only in case of emergency, if all remote controls are no longer operating.
To delete the memory we have to access the white wire of the control unit.
The sequence of this operation is the following:
1) Disconnect the power supply from the control unit, via the main switch for example.
2) Connect the white wire to the brown wire (phase) or to the blue wire (neutral).
3) Connect the power supply to the control unit. This will make the motor rotate briefly
in one direction.
4) Disconnect the power supply from the control unit for at least 4 seconds.
5) Connect the control unit to the power supply: after around 4 seconds the motor
performs one brief rotation in one direction and then a longer one in the opposite
direction.
6) Disconnect the power supply from the control unit.
7) Separate the white wire from the brown/blue wire. Insulate the white wire, in an
appropriate way, before reconnecting the power supply.
At this point it is possible to proceed with the setting of the first remote control.
W
H
I
T
E
W
H
IT
E
E
NG
L
IS
H
+ A B + A B
B