CHERUBINI A510038, Инструкция по эксплуатации

Страница: 12 / 24

Procedure Command sequence
1) Press the A+B buttons for at
least 2 s.
The motor will immediately perform a
brief confirmation movement and after
2 s will start again in ascent.
2) Wait for the awning to ascend
completely.
The motor is now running in dead man
mode, enabling the fine adjustment of
the first middle position.
3) Confirm the position by
pressing B for 2 s.
The motor will perform three (3)
confirmation movements.
Procedure Command sequence
1) Give a long (>2 s) stop impulse
with the motor stopped.
After 2 seconds, the motor will perform
the movement into position.
Note: in motors with electronic limit
switches the proper positioning is
ensured only if the awning starts from
the upper limit position.
31
FIRST MIDDLE POSITIONS
This optional function enables the awning to be moved to a first preferred middle position.
The first middle position is memorized as descent time starting from the upper limit switch.
SETTING FIRST MIDDLE POSITION
Positioning 2 sec
MOVEMENT TO THE FIRST MIDDLE POSITION
DELETING THE FIRST MIDDLE POSITION
.....
4 sec
B
2 sec
2 sec
.....
+
A
B
+
A
B
.....
Adjustment
+
A B
B
B
+
A B
E
NG
L
IS
H