Chemtrac HydroAct HA4, Руководство пользователя

Страница: 85 / 97

5.2 Relay Output 85
Sensor Select the appropriate sensor from the drop down list.
Parameter Choose the appropriate parameter from the drop down list. If the selected sensor has only
one parameter this option may not be available.
The “Next” button is a shortcut to the following configuration screen.
5.2.3.4.2 Configuration Setup
This configuration screen is accessed by pressing “Next” from the Map Output screen or navigating via
the Options Menu.
Options → Setup → Configuration
Polarity
Options are “Normally Open” and “Normally Closed”.
Frequency
Set the pulse frequency as a desired increase in parameter value.
Pulse Width Set the pulse width. The values are in milliseconds and increment in steps of 200ms.
Pulse Gap Set the minimum pulse gap. The values are in milliseconds and increment in steps of
200ms.
5.2.3.5 Options for Device Status Flags
5.2.3.5.1 Map Output
This configuration screen is accessed by pressing “Next” from the Output Setup configuration screen
or navigating via the Options Menu.
Options
→
Setup
→
Map Output