Chemtrac HydroAct 4, Руководство пользователя

Страница: 14 / 77

14 Chapter 2. Overview
2.3.2 Unpacking
Please have a copy of your order with you when you unpack your instrument. All orders are checked
when they leave the factory. Please check that you have all the parts that were ordered as soon as
you open the box. If anything is missing, or damaged, please contact your supplier immediately. If
the instrument needs to be returned for any reason please follow the return instructions given in this
manual (refer to section 6).
Please dispose of the packing in an environmentally responsible manner and in compliance
with local regulations.
2.3.3 Mounting
The HydroAct 4 enclosure is very versatile and can be wall mounted, panel mounted or mounted on a
handrail or pole
1
. The HydroAct 4 electronics should be mounted so that:
• it is away from sources of heat or direct sunlight,
• it is vertical,
• there is sufficient clearance above to allow the enclosure compartment to be opened and
removed,
• it is away from sources of vibration, and
• it will not be hosed down.
2.3.3.1 Wall Mounting
The analyzer enclosure can be screwed directly onto the wall. Mark and drill the holes as per the
drawing below. Insert wall plugs and secure with appropriate screws (not supplied).
HydroAct 4 Wall Mounting
1. 194mm
2. 238mm
2.3.3.2 Panel Mounting
The analyzer enclosure can be panel mounted using the optional panel mount kit. The support bracket
can be used as a template for cutting and drilling the panel.
1
For panel or handrail mounting the enclosure requires optional mounting kits that can be ordered from Chemtrac.