Page 10
Special note for millivolt option:
If the millivolt option is fitted, the only configurable item here is the initial excitation value.
Switch Functions:
Func
Go back to Main Menu screen
◄
Select previous character when in edit mode
►
Select next character when in edit mode
▲
Move edit field selection up
▼
Move edit field selection down
Zero
Go to edit mode for currently selected field
(f)
Input Screen
This screen allows you to change the input channel range and full-scale voltage
(see the Principles section (7.2) for more information on this) and also assign a units
label (up to 5 characters) for the channel data. The number of decimal places
selected on the range field dictates the number of decimal places shown for the
input channel data on the Main screen. To reduce the number of decimal places,
change the number under the edit cursor to a decimal point and the system will
auto format the field when ‘
Zero
’ is pressed.
Special note for millivolt option:
If the millivolt option is fitted, the full scale is represented in mV and shown as such on the screen.
Switch Functions:
Func
Go back to Main Menu screen
◄
Select previous character when in edit mode
►
Select next character when in edit mode
▲
Move edit field selection up
▼
Move edit field selection down
Zero
Go to edit mode for currently selected field
