Page 27
Section 8 -
Service and Calibration
8.1
Service
There are no user serviceable parts inside the instruments. Should any difficulties be
encountered in the use of the CCD100, it is recommended that you contact Chell
Instruments Ltd for advice and instructions.
8.2
Calibration
There is no user calibration for the CCD100. It is recommended that the instrument
be returned annually to Chell Instruments Ltd for a ‘factory calibration’. This will
ensure optimum performance throughout the life of the product.
8.3
Adjustment
There are no user adjustments in the instrument, indeed, the presence of lethal
voltages within the instrument means that the user is strictly forbidden from
removing the covers without invalidating Chell’s obligations under both Warranty
and COSSH.
8.4
Cleaning
A dirty instrument may be wiped clean with a soft cloth that has been sprayed with a
proprietary ‘foaming cleaner’, then wiped dry immediately.
Under no circumstances should the instrument be wetted
directly or left damp
8.5
End of Life
Chell Instruments Ltd complies with the WEEE legislation and is registered as a
manufacturer and importer of Electrical and Electronic Equipment.
Once this equipment reaches its end of life, or is no longer required it may be
returned to Chell Intruments Ltd to be reused or recycled in accordance with the
legislation. Please contact Chell Instruments Ltd for full details. Terms and
conditions apply.
