Page 9
(d)
Main Menu Screen
The Main Menu screen allows the user to select screens that are used for the
configuration of the CCD100 – the setpoint (initial value, initial mode, source), input
(range, full scale, units string), comms, filtering and relays can all be configured
from screens selected via the main menu. It is also possible to reset settings to their
factory defaults from the Main Menu screen. Only 4 options can be shown on the
screen at any one time, so the menu list scrolls up until the last item is shown, and
then the selection arrows move down to allow for selection of any menu item.
Special note for millivolt option:
If the millivolt option is fitted, then the Setpoint menu option will be listed as Excitation to allow for
configuration of the initial excitation value only.
Switch Functions:
Func
Go back to Main screen
◄
No function
►
No function
▲
Go to previous menu selection
▼
Go to next menu selection
Zero
Go to screen associated with menu selection
(e)
Setpoint Screen
(Excitation Screen if millivolt option fitted)
From the setpoint screen you can edit the value of the command setpoint as well as
change the mode (AUTO, OPEN, CLOSED) and the source (INTERNAL, SLAVE). If
SLAVE is selected then the percentage sign (%) appears next to the SP value. For
more information on the command setpoint, see the Principles section - 7.4.
