4.8 Removing Triangle Pad
When your chlid’s weight exceed 8kg, remove
the sleeping pads and triangle pads.
Never use the child seat without it
correctly installed. Make sure that the
metal plate is correctly attached.
Check that the harness straps are not
twisted and that they have been correctly
inserted in the belt slots of the cover.
4.9 Removing the Fabric Cover
CAUTION!
CAUTION!
1. Remove the 5-point harness.
2. Take off the cover from the backrest and base.
3. Move the headrest of the child seat up to the
highrest position.
4. First take the cover off the base of the
headrest, then remove the cover of the
headrest.
To re-fit the cover, simply follow the above steps
in reverse.
17
18
5.INSTALLED IN CAR
5.1Installed in Car with Belt
5.1.1 Installed in Rearward Facing Position with
Belt
5.1.1.1 Gr
Pull the vehicle seatbelt and pass the lap belt
section through the belt guidance
③
and under
the sleeping cushion.
Pass the diagonal seat belt section through the
belt guidance
②
Fasten the seat belt and pull it tight, ensuring
that the seat belt is not twisted.
NOTE: For children of this size, the child seat
must only be installed in the rearward facing
position and at a maximum angle of inclination
(lying). To make sure that the car seat has
been installed correctly, please sha ke it befo re
use.
DO NOT twist the belt!
Ensure that the buckle tongues are properly
loc ked into the vehicle seat buckle - you will
hear an audible CLICK!
INSTRUCTION
EN
oup0+(0-13KG)
