7
8
INSTRUCTION
EN
Any straps holding the restraint to the vehicle
should be tight, that any straps restraining the child
should be adjusted to the child's body, and that
straps should not be twisted.
Ensuring that any lap strap is worn low down, so
that the pelvis is firmly engaged, shall be stressed.
It is dangerous that making any alterations or
additions to the device without the approval of
the competent authority, and not following closely
the installation instructions provided by the child
restraint manufacturer.
The chair should be kept away from sunlight,
otherwise it may be too hot for the child's skin.
Children are not left in their child restraint system
unattended.
Any luggage or other objects liable to cause
injuries in the event of a collision shall be properly
secured.
The child restraint must not be used without the
cover. The seat cover should not be replaced with
any other than the one recommended by the
manufacturer, because the cover constitutes an
integral part of the restraint performance.
If position of the adult safety-belt buckle relative to
the main load bearing contact points on the child
safety seat is unsatisfactory. Please contact the
manufacturer if in doubt about this point.
Not to use any load bearing contact points
other than those described in the instructions and
marked in the child restraint.
Please read the car manufacturer's handbook
before installing this ISOFIX child safety seat.
Car Safety Belt—Diagonal Belt
Car Safety Belt—Lap Belt
ISOFIX Attachments
4.SAFETY SEAT USE METHOD
4.1 Install Location
4.1.1 When using as Universal categort (Group 0+ I II III),
this child restraint system is suitable for seatbelt
models equipped with a three-point retractor that
complies with ECE R16 and does not apply to models
only equipped with 2-point seat belts.
