9
INSTRUCTION
EN
10
Correct/ Proper
Wrong/ Improper
A. When Use in Group 0 0+I (Use 1-6 level).
4.3 Adjust the Headrest
The shoulder straps are adjusted as follows:
Loosen the shoulder straps of the child seat as
much as possible.
Pull the headrest height adjuster, select the
correct height of the shoulder straps and
engage it in position that fits your child by
releasing the adjuster.
4.2 How to use the harness buckle
Hold the two buckle latches together.
Make sure the right side is up.
Engage them before putting them into the harness
buckle, which should make a CLICK noise.
Pull shoulder straps to remove all slack from the
lap section ensuring that the hamess is lying flat
and the hamess buckle is locked.
Open the hamess buckle by pressing the red
button.
4.1.2 When using as ISOFIX child restraint system
(Group ), this child restraint system is suitable for
I
I II III
4.1.3 When using as Semi-Universal category
(Group 0 ), this child restraint system is
suitable for seat belt models equipped with the
three-point retractor that has passed the ECE R16
requirement and is not suitable for models only
equipped with 2-point seat belts. And only after
installed ISOFIX, then can use on it.
vehicles equipped with the ECE R14 requirements.
And only after installed ISOFIX, then can use on it.
Ensure the airbag is deactivated when using the
seat on the front passeager seat
Only use the seat on the seat if the vehicle seat
is equirped with a 3-point seat belt or isofix
attachments
