15
16
INSTRUCTION
EN
F
G
E
Removing 5-Point Harness and Storage
the Accessory Part
A
Harness
Connector
C
D
Step 2: Removing Shoulder Pads and Belts
Loosen the 5-point harness of the child seat as
much as possible, Remove the belt from the
harness connector and storage harness connector
link to harness connector area on the behind of the
backrest. (Picture A and Picture B) Remember to
tighten the safety belt. (See 4.4) To ensure harness
connector linked well, can not be moved.
Take the Gears Fixed Axle from the plastic stator
and storage Gears Fixed Axle to Gears Fixed Axle
area on the behind of the backrest( Picture C ).
In GroupII III, when don’t use the Top Tether for
installation, storage the Top Tether Gears Fixed
Link to Top Tether Gears Fixed Link area on the
behind of the backrest( PictureD ). Close the instruction
back cover after putting the above accessory parts
to the corresponding areas.
Finally put redundant belt into cloth cover. ( PictureE )
Step 1: Firstly open the instruction back cover.
Step 3: Storage Buckle
Open the buckle, take out buckle latches from
shoulder belt. Pull down buckle cross cloth cover.
later pick up the cover in the PE board and storage
the buckle. ( PictureF and G )
B
