V1.1, June 08, 2021
Companion Plus User Manual
© Copyright 2021 Cheelcare
TM
. All rights reserved.
P a g e
|
10
5. Position part #2 on top of part #3 at length
L
from the edge. Insert the screws into part #2
from beneath part #3 using the holes that match the closest. Tighten the screws with an
Allen key as you hold the locknuts in place using the open-ended wrench.
6. Slightly loosen the screws that are highlighted in the illustration below.
7. Position the base clamps of part #1 over the camber tube of your wheelchair. Place the
small clamp halves (highlighted) over the camber tube. If the clamps do not fit tightly
around the camber tube, add rubber strips between the clamp and the tube to ensure a
tight fit. Center part #1 on the camber tube. Loosely secure the clamps in place using the
clamp screws and an Allen key. You will need to adjust their position later.
Part #3
Screw
Locknut
Part #2
L
Part #1
Clamp screw
