Checkpoint Counterpoint iD, Быстрый старт

Страница: 6 / 13

Checkpoint Systems, Inc.
– Field Service Installation Document – CKP P/N
10073883
Page 4 of 7
Status LED Functions
*Future Release
Reset Button
This button resets the unit and auto-tunes the
antenna under certain conditions. See
Tuning
on page 7.
DMS Setup
Some features of CPiD are able to adjusted / applied without DMS, others are
not. For example, DMS is required to enable the secondary transmitter.
( Click here for FSWP link. Download DMS Version 1.8.95 or later.)
GPIO
The default system configuration has the following GPIO functions:
• GPO – Primary Alarm Relay
• GPI – Disabled
Any other functionality needs require DMS.
Status LED Function Red Yellow Blue Teal White Violet Green
Detection (Tag Alarm) X
Waiting for Interlock X
Keyswitch disabled X
AutoTune Blink
Auto Tune Window
0.5s after
reset is
pressed
Auto Tune Error X
Antenna Overvoltage Blink
Mistuned Blink Blink
Verification Mode X
Mode 4 X*
Mode 5 X*
Mode 6 X*
Factory Default Settings Blink at
power up