Quick Start Guide: Counterpoint iD
Page 5 of 7
Mounting
A secure location, such as behind an access door below the register, is ideal for
mounting. Plan routing and location so the unit will not be struck by anything.
When possible, locate unit such that user has ability to interface with device.
Consult the SOW when provided. Customer may prefer / request no access.
Volume can only be muted in DMS. Choose 1 of the following orientations:
Figure 1: Typical Orientations
Top plate has front and rear. Install with edge in rear (away from user). User
can remove entire chassis to change configuration or adjust power.
If mounting permanently, install 2 hex head
screws using top plate as a template for the
2 screw locations.
• Do not install chassis with front
against a surface that can block
access or prevent assembly.
• Always release the front latch to
remove the chassis or top plate.
• View front labels to ensure unit will achieve correct orientation. An
easy visual cue is with the Sounder on the left.
