Check Point Pointsec PC, Руководство по установке

Страница: 23 / 44

Review precheck.txt
Chapter 1 Before You Install Pointsec PC 17
Update Profile Download Settings
Here you can specify how update profiles should be managed.
Software Upgrade Download Settings
Here you can specify how software upgrades should be managed.
Table 1-4 Upgrade Profile Download settings
Setting Description
ProfileInitialStartDelay=
First delay before any action. The value is in minutes.
ProfileFirstDelay=
Delay after the first action, for example, the first attempt to
read the update profile, before the real cycle starts. The value
is in minutes. The default value is 90 minutes.
ProfileUpdateInterval=
Update interval cycle time. The value is in minutes.
Immediately after installation, Pointsec PC checks for update
profiles, then it waits 90 minutes before checking for update
profiles again (90 minutes is the default if no other value has
been set for
ProfileFirstDelay ). After this second check for
update profiles, the checks will be carried out at the interval
that has been specified for this setting.
ProfileRetryInterval=
Time between retries. The value is in minutes.
ProfileRetryCount=
Max retry attempts before retries are cancelled this cycle.
Table 1-5 Software Upgrade Download settings
Setting Description
PatchInitialStartDelay=
First delay before any action. The value is in minutes.
PatchFirstDelay=
Delay after the first action, for example, the first attempt to
read the profile, before the real cycle starts. The value is in
minutes.
PatchUpdateInterval=
Update interval cycle time. The value is in minutes.
Immediately after installation, Pointsec PC checks for
updates, then it waits 90 minutes before checking for
upgrade profiles again (90 minutes is the default if no other
value has been set for
PatchFirstDelay ). After this second
check for upgrade profiles, the checks will be carried out at
the interval that has been specified for this setting.
PatchRetryInterval=
Time between retries. The value is in minutes.
PatchRetryCount=
Max retry attempts before retries are cancelled this cycle.