Check Point Pointsec PC, Руководство по установке

Страница: 22 / 44

Review precheck.txt
16
General Update Settings
These are settings that Pointsec PC will use if no other settings are
configured for profile download, Pointsec PC upgrade download, and
central log transfer.
If a different value is set in one or more of the settings that follow, that
value will be used for that setting.
Table 1-3 General Update settings
Setting Description
InitialStartDelay=1
Here you can specify the delay before Pointsec PC takes any action
regarding intervals. The values are in minutes.
Minimum value = 0
Maximum value = 180
FirstDelay=0
Here you can specify the delay before Pointsec PC starts the
interval. The values are in minutes. The default value is 90 minutes.
Minimum value = 0
Maximum value = 120
UpdateInterval=30
Here you can specify the interval Pointsec PC waits before checking
for update profiles. The values are in minutes.
Note: Immediately after installation, Pointsec PC checks for update
profiles, then it waits 90 minutes before checking for updates again
(90 minutes is the default if no other value has been set for
FirstDelay ). After this second check for updates, the checks will be
carried out at the interval that has been specified for this setting or,
if nothing has been specified, at the default, every 30 minutes.
Minimum value = 30
Maximum value = 180
RetryInterval=3
Here you can specify the interval Pointsec PC waits between retries
when searching for updates. The values are in minutes.
Minimum value = 1
Maximum value = 20
RetryCount=5
Here you can specify the number of times Pointsec PC should retry
an update search before aborting tries for this cycle.
Minimum value = 0
Maximum value = 10