CHD 8-440, Руководство по установке

Страница: 4 / 16

VP330-KBD
Roland VP-330 MIDI Interface
Model 8-440 ver. 1.0
Copyright © 2015 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
4
The VP330-KBD-M interface kit delivery contains :
1. MIDI Interface board
2. Bunched cables with tumbler switch and LED
3. 2x DIN-5 socket with cable
4. Flat control signals cable (50-wire)
5. Power supply bunched cables (4-wire)
6. Shielded cable
7. Coupling elements (screws, supports, tightening strips …)
8. CD-ROM with support software and manuals in PDF form
9. 3x manual in printed form
2. MIDI INTERFACE INSTALLATION
Installation of the interface into Roland VP-330 instrument is very easy. If you follow the
instruction from this manual carefully, there should be no major problems during the installation
procedure. Detailed steps of interface’s parts installation is described in chapters below. Please keep
these instructions accurately to not damage the instrument.
Attention! Disconnect the instrument form the mains prior to the installation.
Otherwise, there is a risk of the electric shock!
Attention! Observe precautions for handling electrostatic discharge sensitive devices!
The producer is not responsible for any eventual mechanical or electrical damage of
the VP-330 instrument caused by the infringement of the described installation
procedure or by careless manipulation during the installation of the MIDI interface!
2.1. OPENING THE INSTRUMENT
a) Unscrew five screws on bottom side of the instrument (pic. 2.1.1). Keep the screws. They will
be used again after the MIDI kit installation is finished. Remark: These screws hold instrument’s
keyboard to bottom plate of instrument’s cover.
b) Unscrew six screws on top panel of the instrument (pic. 2.1.2). Keep the screws. They will be
used again after the MIDI kit installation is finished. Remark: These screws hold instrument’s top panel.
Pic. 2.1.1 Pic. 2.1.2
c) Carefully open the instrument - lift off the instrument’s panel. Now, all instrument’s parts and
boards needed for the interface installation are accessible (pic. 2.1.3).