CHD 8-440, Руководство по установке

Страница: 11 / 16

VP330-KBD
Roland VP-330 MIDI Interface
Model 8-440 ver. 1.0
Copyright © 2015 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
11
g) Now, it is necessary to solder particular wires of flat control signals cable to certain pads on
AGH19 / AGH17 board (pic. 2.5.8 and table 1). Note that wire Nr. 2 (tone C1) can be soldered to any
of pads Nr. 1 and 2 of J4. As mentioned above, length of particular groups of wires of flat cable should
be adjusted as required (pic. 2.5.9).
Pic. 2.5.8
h) After soldering all the wiring, the board should look like on pic. 2.5.9.
Pic. 2.5.9
i) Return the AGH19 / AGH17 board to the original position and fix it back to bottom plate of the
instrument with ten original screws (pic. 2.5.10).
j) Plug fifteen connectors J1 to J15 of bunched cables back to the board. Do not plug J16
connector of shielded cable yet (pic. 2.5.11)!.